The CMR Velocity Sensor converts the velocity pressure from the probes into an air volume. The CMR Venturi volume measurement stations are manufactured in fileslib. Provides dimming output to control. 0-10 VDC dimmable ballasts Two selectable modes of operation The CMR PDT 9 Series occupancy sensors. Sensor Switch™ CMR 9 Line Voltage Ceiling Mount Occupancy Sensor, 120/277 VAC, A line voltage sensor provides one relay for a single level control, CMR 375. Ceramic Capacitance Gauge. Operating Instructions p = (6 V - 1 V) × 0.125 × 1000 mbar ➂ Connect the sensor cable to the controller.
P-SENSOR LINKS AND POTENTIOMETER SETTINGS. CALIBRATION INSTRUCTIONS. P-SENSOR OPERATING INSTRUCTIONS. CMR CONTROLS. Division of C.M.RICHTER EUROPE LTD.
The P-Sensor is a velocity and volume transmitter and it works in conjunction with all the CMR veloprobes, velogrids, oval flow probes and venturis to measure.