The force feeder is applied to the HAAKE MiniLab to ensure continuous sample feeding and the feeding zone is cooled to avoid melting of the raw material in the feeder funnel. Temperature of the The HAAKE MiniLab 3 Micro Compounder is a conical, twin-screw compounder with an integrated backflow channel. The compounder works as either a stand-alone unit or can be fully computer-controlled system, and can be used with either co- or counter-rotating screws. It is equipped with an inert gas flush system. Manual. View the manual for the Arturia MiniLab MKII here, for free. This manual comes under the category Midi keyboards and has been rated by 6 people with an average of a 8.4. This manual is available in the following languages: English. and authorize it (see Chapters 2 and 3 of the Analog Lab user manual). 2. Connect the MiniLab MkII keyboard to the computer. MiniLab MkII is powered by its USB connection, so all you have to do is connect a USB cable from your computer to the MiniLab MkII keyboard. 3. MiniLab MkII is a class-compliant USB device, so its driver will be automatically Connect the HAAKE MiniLab 3an USB port of the PC. Power on the HAAKE MiniLab 3; A popup window in the Windows system tray will show up, indicating the hardware is initialized. Wait till this popup displays a message 'The hardware can now be used' Thermo Scientific ™ HAAKE MiniLab II Micro-Compounder Use to measure structural changes during compounding and assess rheological properties of test materials ideal for R&D. The pneumatic force feeder guarantees easy sample loading. An integrated, bypass valve lets you recirculate the sample in a slit-capillary backflow channel or extrude it for Thermo Scientific HAAKE MiniLab 3 The micro-compounder for small sample amounts co- or counter-rotating screws, has an inert gas flush system and offers optional ½" UNF measuring ports in the barrel top. Applications The HAAKE MiniLab 3 offers a quick and early assessment of new material formulations and thus helps to shorten time to market. Haake PolySoft OS does not have specific hardware requirements. As long the requirements of the Windows Operation System are fullfilled PolySoft OS will run. The following ports are required to connect the PC to the instrument. One USB 2.0 port for PolyLab OS, PolyLab QC and MiniLab 3. One serial COM for for MiniLab II and MiniLab.