Next, remove the hard drive from the anti-static bag. The SATA cable is for data, and looks like a smaller version of the power cable, with the same L-shaped bend in the end. You may also need to plug this cable into your motherboard, where there will be a row of ports with the same shape. SATA Hard Disk Drive. Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard. Spreading the hard drive I/O load across independent channels greatly improves I/O performance. Getting your data off an old hard disk drive is easier than you think. If the device has been disconnected from its original PC and kept free from knocks, the data should be retrieved with relative ease. IDE drives use the IDE ribbon cable, so the motherboard will need to have a compatible port. Alibaba.com offers 850 hard drive motherboard cable products. A wide variety of hard drive motherboard cable options are available to you, such as usb type, material, and cable length. The new hard disk will be represented in "This PC" i.e. you can work with it as an ordinary local not to the video card connector, but to the embedded video output of the motherboard (if there is one). Picture taking your internal hard drive out of the computer and putting it in a case, then connecting Hard drive adapters like SATA to Molex power adapters power drives for fast data transfer. A SATA cable can run power to optical drives like a hard drive or a DVD-ROM. Swapping out a motherboard can be a time-consuming task and a hard drive failure is nearly catastrophic. Remove the hard drive cable by pulling its connector straight away from the hard drive. Step 11. Lift the hard drive/IR sensor cable assembly out of the upper case. If your replacement part does not come with the hard drive bracket and indicator light, you will need to pull those off of the part you are These days you'd be hard pressed to find such board, they all tend to have only the SATA ports. Most of them look similar to this instead - i.e. not even one of those long IDE connectors And the back side where you would connect the Sata cable and the PSU cable to power the hard drive. 1.9K views ·. Add to My Manuals Save this manual to your list of manuals. Page 104 highlights. Figure 2-22. Excessive flexing can damage the floppy drive cable connections. • • Connect the floppy drive cable to the motherboard prior to replacing the floppy drive and hard disk drive guide.323187-001 When If the device uses removable hard drives in special bays, simply eject the drive from the bay; Examine the holder of the hard drive: if the back panel Please refer to the expansion card installation manual for more details. Make sure that the expansion card kit contains a sufficient number of data cables Your first thought might be that your hard drive/solid state drive has failed and you're panicking because you didn't back it up like you meant to. This guide will take you through the simple steps in replacing your drive's SATA cable safely and easily. By following this guide, you will save yourself To have 2 hard drive cables fail in any computer, notebook or desktop, is cause for suspision that there is something else going on that is causing them to fail or look like they have failed, as in a loose connection at the motherboard. Honestly I have worked on many notebooks of all ages, shapes To have 2 hard drive cables fa