inches of the supply end of the air handler. Failure to do so can result in fire, property damage, personal injury and/or death. General Information. Installation or MANUAL to properly start up the air handler. POWER SUPPLY CONNECTIONS. If the air handler has been installed prior to installing the electric heaters or if an Downflow Conversion Kit used to Modify Air Handler Units for Downflow Application. 0672327-00. February 2015. Installation Instructions. 2175 West Park Place 2 Apr 2011 These instructions must be read and understood completely before attempting .. Remove air-seal assembly from coil by removing 4 screws. b. Read this entire instruction manual, as well as the instructions supplied in separate The installation of the air handler, field wiring, warm air ducts, etc. must INTRODUCTION. This booklet contains the installation and operating instruc- tions for your air handler. All warnings and precautions within this booklet must be Air Handling Air Conditioning and Heat Pump Units, Installation Instructions; 2/1/ .. Heil FXM4X, R-410A, Fan Coil Product Specifications; 7/22/2019, Current. NOTE: Read the entire instruction manual before starting the installation. NOTE: Please refer to the literature provided with the connected HVAC equipment forAHP Series Air Handler Installation & Operation Manual; 5/2/2005, Obsolete .. Heil 8MPL 80% Deluxe Single Stage NOx Approved Gas Furnace Specification CAUTION, and NOTE are used to identify levels of manual in the following manner: . Do not install unit under roof overhangs unless gutters are present.