Search: Install Line Output Converter Factory Radio. 4 systems: Does not retain the ability to change all vehicle settings, including horn honk with lock and fuel saver display (does not affect Uconnect 2 Here is the Line-Out Converter you need: Scosche 2-Channel Speaker to RCA Line Out Converter Do not cut an ISO Mount kit and install the metal radio sleeve! KISLOC Speaker wire-to-RCA Converter with LOC, 2ch. The KISLOC is the next level of line-out converters. ⚠ WARNING : This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP) , which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm. When installing or replacing wiring or devices, each of the parts you have have to have the appropriate amperage rating to the circuit. For example, a 20-amp circuit should have 12-gauge wiring, that's rated for 20 amps. 2 Channel, Adjustable Line Output Converter with Short Protection 55 Watt. This Line Output Converter is designed to work with OEM radios that have short circuit protection when adding an aftermarket amplifier. This eliminates the need to re-wire. Extremely easy to install with a new smaller easy to mount design and molded channel so zip ties A: Answer. You will need to run a remote wire in addition to the line output converter. You can access your vehicles fuse panel and splice into any circuit that is switched on with the ignition. I would recommend using a t splice and if capable solder your connection. Answered 2 years ago by Audiophilia. Part Number LOC90. $24.99. LOC90 Line Output Converter converts speaker wire (high-level) to RCA outputs (low-level) for the purpose of adding a 2-channel or mono amplifier to an existing factory or aftermarket stereo system. The LOC90 features up to 4 volts output and signal sensing turn-on with ability to drive a relay. The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. 4-CHANNEL LINE OUTPUT CONVERTER FEATURES 4-Channel LOC: Line Output Converter electronically adjusts high level speaker outputs to low level RCA outputs. Necessary when integrating OEM (factory) radios with aftermarket amplifiers and speakers. 2CH / 4CH Mode Switch: Allows you to select between 2-channel or 4-channel input without the use KEYLOC. ®. Smart Line-Out Converter. This revolutionary, DSP (digital signal processor)-controlled, line-output converter automatically detects the frequency response and phase of your factory stereo system, and then allows you to integrate into a more fun, modern entertainment setup! ⚠ WARNING: This product can expose you to chemicals Adjustable Line Output Converter Description Documents Print Line out converter for factory radios with 2 to 50-watts per channel. Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system. 50 watts maximum input per channel Linear 20 to 20,000Hz output based on the input signal Trim Line Output Converters (LOC) PROFESSIONALLY ENGINEERED Engineered to optimize audio levels between radio and amplifier to achieve the best audio performance and avoid noise. PAC's LocPRO, redefines the l