Find the most up-to-date version of MIL-STD-1629 at Engineering360. Document History. MIL-STD-1629. Procedures for performing a failure mode, effects & criticality analysis (superseding MIL-STD-1629) (no s/s document). standard by Military Specifications and Standards, 11/24/1980. ?? Amendments Available. MIL-STD-883E, Method 1017 - Neutron Irradiation Purpose: The neutron irradiation test is performed to determine the susceptibility of semiconductor devices to degradation in the neutron environment. the tests described herein are applicable to integrated circuits, transistors, and diodes MIL-STD-1629 gives the DOD's procedure for performing a failure mode, effects and criticality analysis. This can also be called an FMEAC analysis. This analysis is the process of determining the root cause of a failure or identifying possible ways a design could fail so that the design could be improved. MIL-STD-1629A3.8 Engineering Failure Mode MTBF and Remarks. Calculate and provide MTBFdata for each engineering failure mode (failure cause) developed as part ofTask 101. Also include any remarks pertaining to hnd clarifying any othercolumns. MIL STD 2097 : a. Acquisition of support equipment and associated integrated logistics support. MIL STD 2173 : 0. Reliability-centered maintenance requirements for naval aircraft, weapons systems and support equipment. MIL-STD-1629A 24 november 1980 superseding MIL-STD-1629 (ships) 1 november 1974 MII.-STD-2O7O (as) 12 june 1977 military standard procedures for performing a failure mode This preview shows page 335 - 337 out of 397 pages. 26. MIL-STD-1629A, Procedures for Performing a Failure Mode, Effects, and Criticality Analysis, Department of Defense, Washington, D.C. 27. ANSI/IEEE-STD-730-1984, IEEE Standard for Software Quality Assurance Plans Criticality - Mil-Std-1629 Approach. CRITICALITY is a measure of the frequency of occurrence of an effect. May be based on qualitative judgement or May be based on failure rate data (most common).