NVT | NV-452R 4 Channel UTP Active Video Receiver. MFR PART # NV-452R. PART # 299587. specsheet logo Spec Sheet · Email. Print. Minimum 1 EACH. When using the model NV-452R, either connect UTP wire to terminal block as described in #4 above, or connect UTP wire using 8-pin RJ45 connector as shown 5,280ft/1 mile (1,6km) when used with NV-653T transmitter and Cat-2 or 3 wire The NVT Model NV-452R 4-Channel Video Receiver is an active (amplified) Connect the 4-pair Cat-5 using the NV-216A-PV's or NV-218A-PVD's 8-pin RJ45 to the NV-413A or NV-452R via UTP using RJ45 connectors and Cat5 cable. Use with the NV-452R, NV-652R, NV-862R, NV-1662R or NV-3262R as a rack- The NVT Models NV-813A, NV-1613A and NV-3213A are 8, 16 and 32-portNetwork Video Technologies. 4005 Bohannon Drive • Menlo Park, CA 94025 • USA. (+1) 650.462.8100 • FAX (+1) 650.326.1940 nvt.com • nvt.com/email/ The NVT Model NV-452R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or colour video on up to one mile (1 NV-452R 4-channel Video Receiver is an active device that allows the transmission of real-time monochrome or color video on up to 1 mile using Category The NVT Model NV-452R 4-channel Video Receiver is an active (amplified) device that allows the trans- mission of real-time monochrome or color video on up The NVT Models NV-862R, NV-1662R and NV-3262R are 8, 16 and 32-port active (amplified) devices that allow NV-452R 4-Port Active Receiver or NV-652R