In this short how-to video, we'll illustrate how to reset a 3730-3 Positioner to factory default settings and perform an auto calibration. For this example, we've mounted the positioner to a 2

Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767 Application Single-acting or double-acting positioners for attachment to pneumatic control valves. Supplied with a pneumatic input signal 0.2 to 1 bar or 3 to 15 psi (Type 3766) or an electric input signal from 4(0) to 20 mA or 1 to 5 mA (Type 3767). Series 3730 Electropneumatic Positioner Type 3730-4 with PROFIBUS-PA communication Application Positioner for attachment to pneumatic control valves Travels 3.6 to 200 mm · Opening angle 24 to 100° Smart, bus-powered field unit conforming to PROFIBUS-PA specification based on IEC 61158-2 transmission technology. Samson 3730 Instruction Manual 3730 Instruction Manual Type 3730-2 Electropneumatic Positioner. Mounting. Operating Definitions of the signal words used in these instructions Automatic and manual modes. Type 3730-4 Electropneumatic Positioner with Electropneumatic Positioner Type 3730-2 and Type 3730-3 with HART communication Application Single-acting or double-acting positioner for attachment to The SAMSON configuration software, TROVIS-VIEW, can be used to configure the positioner. For this purpose, the positioner Get quicker service and more efficient support. Register Your Product; Return Authorization. Need to service your product? Request a return authorization; Contact Samson Technologies. Contact us using online contact form or call us Monday - Friday 9am - 5pm Eastern Time. 1-516-870-7200. Additional Support Resources. Warranty Information. Online Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adapta-tion to valve and actuator. Reference variable 4 to 20 mA Travels 3.75 to 200 mm Opening angle 24° to