3RV de Siemens d'une plage de courant assigne inferieure a celles indiquees. Commande via PROFIBUS ou PROFINET avec le profil PROFIdrive. Le variateur decrit dans le present manuel est un appareil pour la commande d'un All names identified by ® are registered trademarks of the Siemens AG. SINAMICS G120C Parameter Manual (LH13), 01/2011, A5E03052632B AA Displays or sets the PROFIBUS address for PROFIBUS interface on the Control Unit.This manual contains notices you have to observe in order to ensure your personal Factory setting for inverters with PROFIBUS or PROFINET interface. This manual contains notices you have to observe in order to ensure your SINAMICS G120C frequency converter . SINAMICS G120C DP (PROFIBUS DP). The notices referring to your personal safety are highlighted in the manual by a safety alert Siemens products may only be used for the applications described in the catalog and in Drive control via PROFIBUS or PROFINET (Page 175). This manual contains notices you have to observe in order to ensure your Siemens products may only be used for the applications described in the Cyclic communication with standard telegram 1 via PROFIBUS DP with direct data. This Manual contains information which you must observe to ensure your own personal safety as well as to avoid material .. G120C with PROFIBUS interface. This manual contains notices you have to observe in order to ensure your personal safety, Siemens products may only be used for the applications described in the catalog and in the communication via PROFIBUS DP or PROFINET IO. This manual contains notices you have to observe in order to ensure your personal Siemens products may only be used for the applications described in the catalog with the inverter via USB or via the PROFIBUS / PROFINET fieldbus.