are processed by UL through its electronic publishing system. The manner in which requirements of the standards are applied in conducting certifications is determined by the responsible certification organization. Responsibility for the content and maintenance of the Style Manual for UL Standards is vested in the UL Standards Department. UL Certification Customer Information. UL Certification Customers have free access to UL Standards, not including UL IEC Based Standards. UL Certification Customers may access published Standards materials by using the Standards Certification Customer Library (SCCL) at ULstandards.com. Send comments (with copy to psa@ansi.org) to: Jeff Prusko, (847) 664-3416, jeffrey.prusko@ul.com BSR/UL 2127-201X, Standard for Inert Gas Clean Agent Extinguishing System Units (revision of ANSI/UL 2127-2018) UL proposes a recirculation to the proposals from 11-9-18. Technical Data 2127 Effective April 2017 Supersedes December 2015 BSSMANN SERIES HEB breakaway and non-breakaway in-line fuse holders for UL 13/32" x 1-1/2" supplemental fuses Catalog Symbol: HEB* Description: The Bussmann™ series of HEB submersible, single-pole in-line fuse holders for UL 13/32" x 1-1/2" supplemental fuses. #LER-2127 with overall dimensions of 42.875"H x 27.00"D x 23.06"W; usable height of 21 rack units, and usable depth of 24.34". Rack construction shall be fully welded certified U.S. steel with 16-gauge frame and 14-gauge bottom re-inforced at load-bearing junctions, all with black wrinkle powder epoxy finish. Welded sides shall feature vents at top FN-2127 HOCHIKI PDF - Product Specifications. • 9th edition approved UL • Capacity of up to 64 panels with zones of programming through software. • Powerful and versatile . Rating: 105 deg C, 600 Vac, Horizontal flame, 60 deg C wet. Optional - 60 deg C Oil. Conductor: 26 AWG - 9 AWG, solid or stranded. Insulation: Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. The basic standard used to investigate clean-agent extinguishing system units in this category is ANSI/UL 2166, "Halocarbon Clean Agent Extinguishing System Units," or ANSI/UL 2127, "Inert Gas Clean Agent Extinguishing System Units." The basic standards used to investigate clean-agent extinguishing system unit assemblies in this category are TRAY CABLE TYPE TC, UL 1277 THHN/THWN Insulation - PVC Jacket Copper Conductors 600 Volt 90°C Application:Power, control, signal, communication, and lighting circuits, 600 volt rated. Installation: in cable trays, raceways with messenger wire, open air, or direct burial applications, in hazardous locations per Article The FireNET 2127/4127 is an analog addressable fire alarm system that meets the requirements of UL 864 9th Edition. 1.1 Basic Features The basic FireNET 2127/4127 control panel includes two SLC (Signaling Line Circuit) loops. Each loop is capable of supporting 127 analog addressable points The Kidde Fire Systems' Control Head Monitor (CHM) for electric actuators on discharge valve control heads meets the requirements of NFPA 2001-2012, UL 2166, UL 2127 Underwriters Laboratories in their clean agent standards UL-2127 [4] and UL-2166 [5]. The cup was 7.6 cm (3 in) in diameter, had a wall thickness of 5.50 mm (.216 in) corresponding to schedule 40 steel pipe, 10 cm (4 in) in height and fueled with 120 ml of n-heptane floating on a water substrate to result in a 2.5 cm (1 in) freeboard. Underwriters Laboratories in their clean agent standards UL-2127 [4] and UL-2166 [5]. The cup was 7.6 cm (3 in)